PFAFF – Perfect 1/4 Inch Foot with Guide for IDT™ System

# B,C,D,E,G,J,K,L

Piecing 

The Perfect 1/4 inch Foot is designed to help you achieve a 1/4″ (6mm) or a scant 1/4″ (<6mm) seam when piecing. The needle hole in the foot is oval shaped allowing you to adjust the needle position.

The distance between the centre needle position and the guide is less than 1/4″ (6mm).

1. Snap-on the Perfect 1/4 inch Foot*
2. Engage the IDT™
3. Select a straight stitch
   A. For a 1/4″ (6mm) seam; adjust the needle position one or two steps to the left.
   B. For a scant 1/4″ seam; select a centred needle position or one step to the right.
4. Place the fabric pieces right sides together under the presser foot, aligning the edges of the fabric with the guide on the foot.
5. Sew the fabric pieces together guiding the fabric so that the edges touch the guide
6. Press the seam allowance and measure the block

Topstitching 

The Perfect 1/4 inch Foot is also wonderful for topstitching. Adjust the needle position and use the guide to place your stitching exactly where you want it on your blocks, garments and home decor projects.

1. Snap-on the Perfect 1/4 inch foot
2. Engage the IDT™
3. Select a straight stitch, triple straight stitch or the mock and hand quilting stitch. Adjust the needle position as desired if needed.
4. Place the project under the presser foot so that the guide on the foot runs in the ditch of the seam or along the edge of the fabric. sew.